- Home /
- Product Details
Estimated Lead Time: 6-8 Weeks
Flame Amplifier, Dynamic Self Check
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
Flame failure response time of 0.8 or 3.0 seconds.
Flame signal strength ranges from 0.0 to 5.0 Vdc.
Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
Flame signal test jacks to measure amplifier flame signal voltage.
Color-coded labels identify flame detection type.
Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
Compatible with existing Honeywell flame detectors (order separately).
Comments : Color: Purple
Approvals, Underwriters Laboratories Inc.: Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association : Certified: File No. LR95329-3
Flame Failure Response Time (sec): 2.0 sec or 3.0 sec
Approvals, Swiss RE : Acceptable
Approvals, Factory Mutual : Approved: Report No. 1V9A0.AF
Self Checking : Dynamic Self-Check
Use With Primary Safety Control : 7800 SERIES Relay Modules
Use With Flame SensorGas, oil, coal: Ultraviolet Flame Sensor C7061
Shipping Weight : 1.5 Kg
|Dimensions||16 x 22 x 123 cm|